CHOOSE YOUR WEAPON

20”-24” Long (STANDARD) 

25”-30” long (EXTENDED)

12” width base straight taper to 5” width punch edge

Featuring double layer, 5mm Poplar Plywood-reinforced with 1/16” thick steel punch plate and 1” aluminum plates on either side-  wrapped in bonded canvas and bordered with 9-10oz leather covering. 

Two part, leather straps are secured using modern carriage bolts (typically 1/4”). Our standard spacing is 4” from the centerline of the grip to the punch edge. We do accept custom strap measurements. For a more detailed rundown of our punch shield production methods, please visit this link.

20”-24” long (STANDARD)

25”-30” long (EXTENDED)

12” base width tapers to 11” to 7.5” then straight taper to 5” width punch edge 

Featuring double layer, 5mm Poplar Plywood-reinforced with 1/16” thick steel punch plate and 1” aluminum plates on either side-  wrapped in bonded canvas and bordered with 9-10oz leather covering. 

Two part, leather straps are secured using modern carriage bolts (typically 1/4”). Our standard spacing is 4” from the centerline of the grip to the punch edge. We do accept custom strap measurements. For a more detailed rundown of our punch shield production methods, please visit this link.

12” round buckler

Triple layer 5mm Poplar Plywood glued and canvased with fully 9-10oz leather border. Aluminum edging also offered.  

Hafts are made of white oak, laminated with waterproof PVA. Axe head is wrapped in glue and canvas then covered with hemp. Ranging from 6”-20” hafts. For the ultimate in strength and durability, two fiberglass mesh layers are inserted between the wood slats and epoxied into place.  The order will vary depending on the final thickness of the haft, but typically it will be two layer of wood, a layer of fiberglass mat, a layer of wood, a layer of fiberglass matt and two layers of wood.For more details on our haft production methods, please visit this link. Please also see our Haft Warranty Policy .